Cognitive TPG A799 Guía de usuario descargar pdf (Pagina 15)

Chapter 3: Setting up the Printer 15

12/08 A799-UG00001 Rev. C A799 Two-Color Thermal Receipt Printer: User Guide

Connect the cables

Cable connections are made at the back of the printer.

Caution: Connect the cables to the printer before applying power. The host computer should always be turned off before

connecting communication cables.

Cash drawer cables

The cash drawer cable connects the printer to one or two cash drawers.

(For pin-out, see Service Guide.)

To install the cash drawer cable:

1 Open the connector cover.

2 Plug the cable into the cash drawer connector located at the right side of the illustration.

3 Route the cable up and through the strain relief clip above the connector and through the opening in the connector

cover when shut.

Note: If installing two cash drawers, you will need to obtain a Y-cable as shown in the illustration below.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Sin comentarios

Cognitive TPG A799 Guía de usuario Pagina 15