Cognitive TPG A799 Guía de usuario descargar pdf (Pagina 21)

Chapter 4: Using the Printer 21

12/08 A799-UG00001 Rev. C A799 Two-Color Thermal Receipt Printer: User Guide

1 Turn power off to printer.

2 Open connector cover (1).

3 Set DIP switch 1 to the ON position (down) (2).

DIP switch 2 should be in the OFF position (up).

4 Make sure receipt paper (3) is loaded in the printer

before proceeding. Make sure cover is closed.(See page

12.)

5 Apply power to printer and immediately press and hold

the paper feed button (4) until the conguration printout

begins.

• The printer beeps, then prints the diagnostics form

and the conguration main menu.

• The printer pauses and waits for a main menu

selection to be made (see sample printout on the

next page; short clicks are used, except when

answering “yes” or validating selection).

6 To communicate with the printer, you will press the

paper feed button using either short or long clicks. Use

a long click for “yes” (more than one second) and a

short click for “no.” Follow the printed instructions to

make selections.

7 Continue through your menu selections until you are

asked, “Save New Parameters?” Select “Yes.”

a Return DIP Switch 1 to the OFF position (up).

b Reset the Printer.

c Open the receipt cover.

Press and hold the paper feed button while closing

the receipt cover.

• The diagnostic printout veries your new settings.





























To enter the conguration mode:

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Comentarios a estos manuales

Sin comentarios

Cognitive TPG A799 Guía de usuario Pagina 21

Comentarios a estos manuales